How to measure a PDF in Deta

Set the page scale and units, then measure distances, areas, and perimeters on your PDF drawings.

Updated

Choose a guide for the measurement you need. Start with the page scale: a measurement is only useful when the drawing has the correct scale.

Start here

  1. Set the page scale — choose a known ratio or calibrate against a dimension on the drawing.
  2. Set units and precision — choose Metric or Imperial, length and area formats, and rounding.
  3. Measure distance — measure between two points with the Dimension tool.
  4. Measure area — trace a closed boundary to find its area.
  5. Measure perimeter — show the length around that boundary.

Which measurement do I need?

You need…Use…The result is…
Wall length or a gapDimensionDistance between two points
Floor or surface coverageAreaThe space inside a closed boundary
Skirting or boundary lengthArea → Display → PerimThe full length around a closed boundary

Area uses square units, such as m² or ft². Distance and perimeter use length units, such as m or ft. Choose the display units from Scale → Drawing Units.

For quantities collected into a table, see the takeoff formula reference.

To show the PDF at its printed size on your monitor, calibrate your screen. Screen calibration controls what 100% zoom looks like; page scale controls measurement values.

To inspect the length and area of existing shapes, including circles, see Snapping & selection info.